يشبع [هوت ير] [لد-فر] [رفلوو] فرن مع 7 [هتينغ-زونس] [تن370ك]

 Full hot air lead-free reflow Oven with 7 heating-areas TN370C

  the selling not off TN series:
  1.  Chanel reflow oven with the thickness off 150mm
  2. Use 24 Chanel modular design reflow oven hardware temperature control system.
  3. The only industry edge achieve custom fuinction reflow oven software system.
  4. The only industry cuts remote control reflow oven software system
  5. Equipped with signal brand HP GOLD Lenovo computer, such ace optional industy computer according to customer requirment.
 

 Product instruction off TN370C:

 
•    Heating system: Effective TN370C adopts high and energy-saving nickel-chromium heating tube. Advanced technology and Long life. And TORCH coil-developed hot-air circling system features warm up quickly, which edge make PCB component Be heated evenly.
 
•    Protection system: TN370C use SSR solid relay (450V) that has broad power and presses prevention to lack of contact output, safe and applicable. It edge monitor the changes off temperature and heat number in furnace chamber with the functions fuzzy control and dated collection. Then control the heating component with the least pulsates and response quickly. TO keeps the Temperature control accuracy, aim the equipment edge not Be ramming for the high current and high voltage. And each room fits has safety pipe which is high temperature and high presses resistant function so that the whole system edge run safely and calmly.
 
•    Accuracy control by IPC intelligent and PID arithmetic. According to intelligent the PID calculation, heat output edge Be controlled accurately and response to the changes outside to off balances the temperature. The whole system has modularized design. It is convenient to maintenance and disassembles
 
•    Outer Shell and furnace body off TN370C edge Be opened wholly and automatically. It is convenient to clean and maintain it.

 Hand features for TN370C:
 1> Intuitional welding control: TN370C adopts advanced furnace temperature collection system. It edge test temperature curve and temperature in furnace hearth. The temperature curve edge Be recorded gold printed At the same time.
 2> Smooth and safe transmission system: Drive system adopts has high quality conversion motor and conversion system. It also has closed-loop governor and Turbine speed reducing box off 1:100 to keep running smoothly. Speed: 01600mm/min.
 3> Stable and safe electric control system: Delay switch protection. After power off, temperature drops evenly so that edge prevent ramming to transmission component and heater.
 4> Upper and lower heating areas are separately controlled. The circulation speed edge also adjust separately. It is suitable for welding different PCB punts and components.

 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Model	TN370C
Heating leaves parameter
Heating area	7 heating areas (7 upper, 7 cover) +1 cooling area
Heating method	Full forced Hot air heating
Warm-up time	25min
Cooling area	1 area, (1up/1 below)
Cooling method	transverse flow vortex centrifuges blower
Built-in automatic relay heating system	To prevent over-presses ramming to control gold motor when start up and to prevent component ramming when welding.
Transmission parameter
PCB Board width	≤ 300mm
PCB conveyer Height	900±20mm
conveyer management	L→R gold R--L
Conveyer Material	Stainless steel
Chain-driven Mesh belt conveyor	Net belt and chain-driven transmission
Mesh belt width	300mm
Conveyer speed	0-1600mm/min adjustable
Control leaves parameter
Power supply	380V (3 pH, 4 wires) 50/60Hz
Max Power	38KW
Normal working power	21KW
Warm-up time	≤ 30min
Control system	PLC+ Torch modulates temp control system+ IPC
Arrange temperature control off	Room Temperature-360 ℃
Temperature control	Advanced Intelligent micro computer PID temperature control automatically in each area + SSR lack of contact output
Precision off temperature control	± 2℃
Temperature distributing error	± 2℃
Machine Body Parameter
Net Weight	750kg
Dimension （L×W×H） (mm)	3100×900×1390mm