أنت هنا: بيت » منتوجات » [سمت] تجهيزات » [بيك&بلس] آلة » آليّة عادية سرعة [فيسونل] [بيك&بلس] آلة [تب60ف]

[برودوكت كتغري]

اتّصل بنا

[كمبني نم]: بيجين مشعل [ك.], محدودة
بلد/منطقة: الصين
عنوان: نجم مدينة قصر دوريّة [أ-6د], [جيوإكسينقيو] [ا] [نو.10], [شونغ ديستريكت], بيجين الصين
رمز بريديّ/[بوست كد]: 100016
[تل]: 086-010-60509015-890,889,892
فاكس: 0086-010-51662451-8001
موقعة: www.torchsmt.com
بريد إلكترونيّ: [سمتتورش.كّ]
[كنتكت برسن]: [زهوونغإكسين]
[جوب تيتل]: [جنرل منجر]
[سلّ فون]: 086-010-60509015-890,889,892
بريد إلكترونيّ: [سمتتورش.كّ]

آليّة عادية سرعة [فيسونل] [بيك&بلس] آلة [تب60ف]

الكمية:



رسالتك سلة الاستفسارات

TP series has fully automatic vision SMT pick and place machine, it edge mount has off variety components through the vacuum nozzle edge Be mounted .it is the most cost effective automatic placement equipment one recently market. This machine is follows for most off the MDS components, such ace 0402, SOIC, PLCC and QFP IC; With the vision position system, meet the needs off mounting high precision 0.5mm off QFP IC gold BGA. Beside the standard circle does not refer, the public garden, which is not the PCB to balance paste screen printing pad boxing ring perforated pad, edge also Be ace has does not refer to know.

Features:

1. Using imported precision public garden rail, effectively improve the placement accuracy.

2. Single Using year high-definition optical PRISM industrial cameras to supplements mount high-precision components.

3. With the vision position system, edge automatically identify the MARK not, effectively improve SMT production efficiency and placement accuracy.

4. Automatic visional programming, it is No need to input the coordinates off components by manual, programming is simple, easy to learn for beginners and it is convenient and practical.

5. Standard configuration off automatic nozzle replacement system.

6. Cost-effective automatic placement machine, it is most suitable for farmhouse production in middle scale and personal uses.

7. Standard configuration: 4 set visional system, 9 nozzles, 96 feeders counts.

8. Drive by servo motor with high precision ball screw to achieve, you edge supplements the duplication off high precision components mount.

9. Configure variety feeders to meet off different mounting mounting.

10. Configure the special industrial computer with special software, easy to operate.

11.Easy to input the CAD off the PCB.

12. Edge supplements the program and mount the Circuit board puzzle stably and simplify.

13. The software edge display all the puzzle coordinates, and fine tuning sum off the coordinates. To achieve high precision placement

14. You edge set the spacing off each puzzle in the software, and display all the coordinates off discharging based one the distance, also edge choose the puzzle No needing to mount in the puzzle.

15. Yew the circuit board processing cuts quality problems, edge leak hiring to improve the overall shift.

16. The software edge automatically optimize the function off head.

17. Software adds multi-speed transmission features, you edge find the best speed through check the moving table and set the speed, so that edge increase the stability off the machine in length-time use.

18. With has high dismantles off automatic detection and alarm failed components picked up edge effectively improve the production quality control.

19. Components shortage alert, suitable for No body in the farmhouse production.

20. Signal safety function

Standard configuration

1. Industrial Computer 1 follows

2. Mounting head 1 groups

3. Nozzle 9 GCV

4. GFTA-48 feeder table2 set

5. MARK camera 2sets

6. QFP high precision industrial camera 1set

7. QFP high clear light source 2 set

Optional leaves

1. Automatic feeder 8mm, 12mm, 16mm and 24mm

2. IC Disc Feeder （GFQN）

3. Components bulk disk（GFSN）

4. Nozzle

5. AQ38 end mirror system（25MM-38MM QFP）

6. AQ45 end mirror system（38MM-45MM QFP）

7. industrial air pump

	TP60V
Mounter head	1 links 6 heads
Max PCB board	1500×316mm
Mini PCB width	40mm
Thickness arranges	0.3-4.2mm
Max move arranges	670×620mm
Z axis move arranges	40mm
Component max thickness	15mm
Typical speed	11000-13000cph
Max speed	21000cph
X, Y axis precision	0.002mm
Mount precision	±0.03mm
Position manner	Visional position
Component available	Above 0402 and less than 38 mm pitch, more than 0.5mm IC
Program method	Automatic dated importation/video learning/keyboard input
Transmission	XY-axis high precision ball screw with precision guides
Type feeder	Optional 8mm, 12mm, 16mm, 24mm, 32mm, 44mmfeeder
Feeder No.	Edge Be could 96 off GCV 8MM GFTA-08S feeder, the face and back edge Be could 48pcs
IC feeder NO.	No more than 2 GCV
Operation system	WINDOWS XP
Compressed air	80psi （0.5Mpa-0.7Mpa）, creeps No more than100L/min
Power	220V, 50Hz, 5Kw
Weight	1400Kg
Dimension	1650×1485×1400mm

على:

تحت:

[برودوكت كتغري]

اتّصل بنا

آليّة عادية سرعة [فيسونل] [بيك&بلس] آلة [تب60ف]

روابط سريعة

فئة المنتج

[برودوكت كتغري]

اتّصل بنا

آليّة عادية سرعة [فيسونل] [بيك&amp;بلس] آلة [تب60ف]

روابط سريعة

فئة المنتج

آليّة عادية سرعة [فيسونل] [بيك&بلس] آلة [تب60ف]