[لرج-سز] [لد-فر] [رفلوو] فرن مع ثمانية [هتينغ-زونس] [ر800ن]

 【Introduction】:

 Parameter

 
 Mainly configuration listing

 
 R series specialty
 1: Heating system: Obvious Our heating system. temperature warm up quickly and edge keep very stable, High effective edge save Electronic. It is adopted in jointing the PCB and CSP component.
 2, Wind wheel is our obvious design, that is ensure to supply stable wind presses.
 Every heating room is controlled separate circle system. Heating both upper and lower share stable edge make the temperature, accurency and keep in has high level.
 3, The oven cover adopts electromotion motor system that edge make it safe and clear.
 Automatic follow system off the PCB panel and alarm when the fan and temperature is abnormal. Disorder diagnoses and sound-light alarm.?
 Warm up quickly, from room temperature to work temperature only need 20min.
 Imported high quality motor which edge bear high temperature and high speed. The wind is calm and the sound is small.
 
 B: Smooth and safe transmission system:
 the chain and Net types work At the same speed and Be controlled by the computer. The accuracy is ±1.5%.
 the Guideway is made from good aluminum alloy, It has high hardness and edge' T transfiguration easily.
 Add oil is controlled by the computer. That edge make the transportation smoothly and to skirt the using life off the guideway and chain.
 Add the fresh different air to the room continually, that edge make the air presses kept At the same level. Content So the heat is high.
 Reclaim the Nitrogen and rosin system edge take out the O2 and add the Nitrogen quickly
 Control the soldering flow and Nitrogen `S management and flow, and nitrogen is airproof and edge reclaim, that edge save the cost.
 Soldering flow' S filtration Net is designed has drawer, which edge Be clean easily.
 Pump Cooling system
 the cooling speed is 6-8℃/sec, the chock ball is bright and smooth, PCB `S temperature is below 70℃ when it cam out.
 Strong model software controlling system
 the switch edge delay turn off time to protect the machine to make the temperature to cool down slowly. That edge prevent the component one the plug to transfiguration.
 When the power off, this machine edge still transport PCB board out and edge make No ramming to it.
 the machine edge count the PCB' S quantity when it works.
 Did Controlling the room by PID indepently, edge check the temperature and analysis the date, then transfer the result? to standard.
 Transportation system is controlling by computer so the transportation speed and fan speed edge adjust At any spleen.
 Car supervision to show the working condition and test every connector off the equipment.
 
 Furnace protection system.
 Creepage protection: Apply the CHNT creepage to ensures the safety off the person and equipment.
 Car Daley protection: For installing UPS, it edge protect the controlling system and PCB when the power off.
 Cover protection: When the temperature gets high, we open edge the cover quickly to prevent the ramming to Equipment and PCB.

 Sound-light alarm function: It will alarm when there is disorder, and the disorder edge Be recorded for maintenance.